2SFX30GS 3.0GPM 2000PSI 3450RPM 3/4″ GAS
$575.99
SPECIFICATIONS:
- Plunger Pump
- Direct Drive
- Maximum Volume: 3.0 GPM
- Maximum Discharge Pressure: 2000 PSI
- Maximum Inlet Pressure: 75 PSI
- Maximum Pump Speed: 3450 RPM
- Minimum Horsepower Requirements: 3.0 bhp
- Bore: .708″ (18mm)
- Stroke: .177″ (4.5mm)
- Crankcase Capacity: 11.83 oz. use CAT Pump hydraulic oil
- Maximum Fluid Temperature: 160 Degrees F.
- Inlet Port: 3/8″ FPT
- Discharge Ports: Dual 3/8″ FPT
- By-pass Port: 1/4″ FPT
- Dimensions: 9.13″ x 6.65″ x 6.50″
- Weight: 11.83 lbs
Product Description
PUMP FEATURES:
- UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life
- Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities.
- Ultimate portability, less than 11 pounds, less than 10″ long.
- Regulating unloader is standard on each pump to assure system pressure control and pump protection
Additional information
| Weight | 12 lbs |
|---|
Related Products
TSS1511 PUMP 4@3500 1450 24mm
SPECIFICATIONS: Maximum volume: 4.0 Maximum Pressure: 3500 PSI Maximum Pump speed: 1450 RPM Maximum inlet pressure: 125 PSI Plunger Stroke: 16mm Crankcase oil capacity: 40.6 oz. Maximum Temperature: 165 F. Inlet Port: 1/2″ FPT Discharge Port: 3/8: FPT Shaft diameter: 24mm Weight: 32 lbs. Dimensions: 12.2″ x 9.2″ x6.9″$648.50
TSS1021 5.6GPM 1700PSI 1450 RPM
Maximum volume: 4.5 and 5.6 Maximum Pressure: 3500 and 1700 PSI Maximum Pump speed: 1125 RPM and 1450 RPM Maximum inlet pressure: 125 PSI Plunger Stroke: 16mm Crankcase oil capacity: 40.6 oz. Maximum Temperature: 165 F. Inlet Port: 1/2″ FPT Discharge Port: 3/8: FPT Shaft diameter: 24mm Weight: 32 lbs. Dimensions: 12.2″ x 9.2″ x6.9″$710.39
P.M.R. TP2530J34-VRT3-250 W/THERMAL RELIEF
FEATURES: Forged brass manifold with exclusive lifetime warranty New, oversized connecting rods for ultimate crankcase performance Die cast, anodized aluminum, oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original interpump unitized, stainless steel, K123 inlet and outlet valves SAE J609 gasoline engine mounting flange SPECIFICATIONS: Triplex Plunger Pump Maximum Volume: 2.88 GPM Maximum Discharge Pressure: 2500 PSI Rated Pump Speed: 3400 RPM Bore: 15mm Stroke: 6.6mm Crankcase Oil Capacity: 11.0 oz. Maximum Fluid Temperature: 165 F. Inlet Port Thread: 3/8″ FPT Discharge Port Thread: 1/4″ FPT Hollow Shaft I.D: 3/4″ Weight: 11.4 lbs. Dimensions: 7.0×7.2×5.5 inches$388.99
PMR TSS1511-VRT3-310EZ W/THERMAL RELIEF
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor or gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. FEATURES: Manifold with fine thread valve caps The preferred pump frame in the pressure cleaning industry Forged brass manifold with an exclusive lifetime warranty Large capacity, die-cast , anodized aluminum oil-bath crankcase Over-sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricated packings Unitized stainless steel inlet and discharge valves Designed for suction applications$579.99
TX1510G8UIA 4.0GPM 3500PSI 1″ GAS W/UNLOADER & INJECTOR
SPECIFICATIONS: Triplex Plunger Pump Maximum volume: 4.0 GPM Maximum Discharge Pressure: 3000 PSI Horsepower: 12.3 GHP Maximum Pump Speed: 3400 RPM Bore: 15mm Stroke: 10mm Crankcase Oil Capacity: 14 oz. Maximum Fluid Temperature: 165 F. Inlet Port Thread: 1/2″ FPT Discharge Port Thread: 3/8″ FPT Shaft Diameter: 1″ Weight: 18 lbs Dimensions: 8.4″x8.4″x6.5″$384.49
Reviews
There are no reviews yet.