7/8″ gas engine flange
2.0 GPM maximum
2300 PSI maximum
140F maximum temperature
Oil capacity 3.5 oz
Weight: 7.3 lbsDIMENSIONS:
Total Depth: 6-1/4″
Front width: 9-1/4″
Height: 5-7/8″
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor or gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
FEATURES:
Manifold with fine thread valve caps
The preferred pump frame in the pressure cleaning industry
Forged brass manifold with an exclusive lifetime warranty
Large capacity, die-cast , anodized aluminum oil-bath crankcase
Over-sized connecting rods for maximum life
Heavy duty tapered roller bearing
Solid ceramic plungers with continuously lubricated packings
Unitized stainless steel inlet and discharge valves
Designed for suction applications
Triplex Plunger Pump
FEATURES:
Manifold: High strength forged brass for long term use
Bolts: eight 6mm grade 12.9
Plungers: A special thick solid ceramic for long life, strong durability and more resilience
Crankcase: Precison die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.
Valves, Seats, and Springs: Stainless steel with specially designed ultra form cages provide extra long life and positive seating.
Seals and Packings: Continously lubricating for extended life
Plunger Rods: High strength stainless steel
Connecting Rods: One piece special alloy aluminum based oversized for maximum strength, load disbursement, and long life
SPECIFICATIONS:
Maximum volume: 3.5 GPM
Maximum discharge pressure: 4000 PSI
Horsepower: 11.05 GHP
Maximum pump speed: 3400 RPM
Bore: 15mm
Stroke: 8.2 mm
Hollow Shaft I.D: 1″
Inlet port thread: 1/2″ FPT
Discharge port thread: 3/8″ FPT
Maximum fluid temperature: 140 F
Crankcase oil capacity: 14.6 oz
Crankshaft ID stamp: 8
Weight: 16 lbs.
SAE J609 flange for direct couple to gasoline engines
Set screw for key way
Oversized bearings
Longer life low and high pressure seals
Forged brass manifold with exclusive lifetime warranty
SPECIFICATIONS:
Triplex Plunger Pump
Maximum volume: 4.0 GPM
Maximum Discharge Pressure: 3000 PSI
Horsepower: 12.3 GHP
Maximum Pump Speed: 3400 RPM
Bore: 15mm
Stroke: 10mm
Crankcase Oil Capacity: 14 oz.
Maximum Fluid Temperature: 165 F.
Inlet Port Thread: 1/2″ FPT
Discharge Port Thread: 3/8″ FPT
Shaft Diameter: 1″
Weight: 18 lbs
Dimensions: 8.4″x8.4″x6.5″
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a built-in adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
FEATURES:
COMMERCIAL DUTY RADIAL-AXIAL PUMPS
Built-in Uniflow Unloader and chemical injector with inner stainless steel parts
Abrasion proof, heat resistant, industrial ceramic plungers
Stainless steel unitized check valves
Forged bras manifold
Industrial duty construction for extended life
Patent registered ball bearing design
Built-in garden hose adapter
Double sealing buna textile V-packing
Maximum Flow: 2.5 GPM
Maximum Pressure: 2000 PSI
Maximum Pump Speed: 3400 RPM
Shaft: Hollow 5/8″
Weight: 12 lbs.
Reviews
There are no reviews yet.