INDUSTRIAL PUMP FEATURES:
Reversible crankcase for easy right or left hand mounting
Hardened stainless steel piston guides
Highly efficient stainless steel check valves
solid ceramic plungers
High and low pressure seals: high quality buna textile packings
Additional anti-extrusion ring under the seal
solid brass manifolds
Special forged brass oversized connecting rods
Die-cast, anodized aluminum crankcase
High quality tapered roller bearings
Optimal oil bath for high speed operation
SPECIFICATIONS:
Maximum flow: 4.0 GPM
Maximum pressure: 4000 PSI
Maximum speed: 1750 RPM
Shaft: 24mm solid keyed shaft
Plunger: 18mm
Weight: 20 lbs.
INDUSTRIAL PUMP FEATURES:
Reversible crankcase for easy right or left hand mounting
Hardened stainless steel piston guides
Highly efficient stainless steel check valves
solid ceramic plungers
High and low pressure seals: high quality buna textile packings
Additional anti-extrusion ring under the seal
solid brass manifolds
Special forged brass oversized connecting rods
Die-cast, anodized aluminum crankcase
High quality tapered roller bearings
Optimal oil bath for high speed operation
SPECIFICATIONS:
Maximum flow: 3.4 GPM
Maximum pressure: 4000 PSI
Maximum speed: 1450 RPM
Shaft: 24mm solid keyed shaft
Inlet: 1/2″ FPT
Discharge: 3/8″ FPT
Piston: 18mm
Weight: 20 lbs.
SAE J609 flange for direct couple to gasoline engines
Set screw for key way
Oversized bearings
Longer life low and high pressure seals
Forged brass manifold with exclusive lifetime warranty
SPECIFICATIONS:
Triplex Plunger Pump
Maximum Volume: 3.0 GPM
Maximum Discharge Pressure: 3000 PSI
Horsepower: 9.2 GHP
Maximum Pump Speed: 3400 RPM
Bore: 15mm
Stroke: 8mm
Crankcase Oil Capacity: 14 oz.
Maximum Fluid Temperature: 165 F
Inlet Port Thread: 1/2: FPT
Discharge Port thread: 3/8″ FPT
Shaft Diameter: 1″
Weight: 18 lbs
Dimensions: 8.4″ x 8.4″ x6.5″
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
FEATURES
Forged brass manifold with exclusive lifetime warranty
Die cast, anodized aluminum, oil bath crankcase
Solid ceramic plungers with continuously lubricated packings
The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves
Ideal for all general cleaning, RO, and misting applications
Comes standard with NEMA 56C electric motor mounting flange
Also available in “L” left handed version
SPECIFICATIONS
Triplex Plunger Pump
Direct Drive Pump
Maximum volume: 3.5 GPM
Maximum Discharge Volume: 1500 PSI
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 5.3 hp for gas engine
Bore: .591″ (15mm)
Stroke: .315″ (8mm)
Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165 degrees F.
Inlet Port Thread: 3/8″ FPT
Discharge Port Thread: 1/4″ FPT
Shaft Diameter: 3/4″ Gas Flange
Dimensions: 7.0″ x 7.2″ x 5.5″
Weight: 9 lb.
Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Reviews
There are no reviews yet.