Need Help? Call (954) 482-7740

Login
Username
Password
Remember Me
Shopping cart (0): $0.00

5 HP 1725RPM C-FACE 1 1/8″ SHAFT ODP

$1,083.59

SPECIFICATIONS:

Specification number: 36F484W903
Rigid Base with C-Face Open Drip Proof
Shaft: 1-1/8″
Frame: 184TC
Horsepower: 5.0
Voltage: 208/230
Full load amps: 25/23
RPM: 1725
Service factor: 1.15
Full load efficiency: 82.5
Power factor: 87
Shipping Weight: 99 lbs

SKU: 2555 Category: Shafts / Accessories Tags: Pumps, shaft accessories, Shafts

Product Description

FEATURES:

Ball bearing design
1 1/2 horsepower ratings are rated at 14 amps or less on 115 volts
Manual thermal overload located in the conduit box
UL and CSA recognized component approval
200 C copper windingsAPPLICATIONS:
- Pressure washers
- Steam cleaners
- Portable and self contained stationary system for direct drive mount and coupled mount designs

Additional information

Weight	91 lbs

Reviews

There are no reviews yet.

Be the first to review “5 HP 1725RPM C-FACE 1 1/8″ SHAFT ODP”

Related Products

ZWD3035G 3.0GPM 3500PSI 1″ GAS SHAFT

FEATURES: Increased fin depth increases surface area to maximize heat dissipation Stainless steel unitized check valves Heat resistant solid ceramic plungers operating on lubricated packings Direct Drive mounting flange Reinforced crankcase for increased load capacity Enlarged crankcase increases oil capacity for better lubrication and lower operating temperatures One piece industrial grade oversized bronze connecting rods SPECIFICATIONS: Maximum Flow: 3.0 GPM Maximum Pressure: 3500 PSI Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 9.3 hp for gas engines Inlet: 1/2″FPT Discharge: 3/8″FPT Shaft Diameter: Hollow 1″ with gas engine flange Crankcase Capacity: 11 oz. use SAE 20W/30 oil Piston: 15mm Weight: 20.3 lbs.

$448.79

Add to cart

TX1512E179 2.6GPM 3000PSI 1750RPM, 1 1/8″ HOLLOW SHAFT/ELECTRIC FLANGE.4

Features 2.6 GPM 3,000 PSI 1750 RPM CRANKCASE OIL CAPACITY 14 OZ MAX FLUID TEMP 165 DEGREES F FLANGED FOR DIRECT COUPLE TO ELECTRIC MOTOR (NEMA 184TC) SCREW SET FOR KEY WAY OVERSIZED BEARINGS LONGER LIFE LOW AND HIGH PRESSURE SEALS FORGED BRASS MANIFOLD

$485.39

Add to cart

AXD2527G-T 2.5GPM 2700 PSI 3/4″ SHAFT

SPECIFICATIONS: Maximum flow: 2.5 GPM Maximum pressure: 2700 PSI Maximum speed: 3400 RPM Shaft: 3/4″ hollow gas flange Stainless Steel Pistons Weight: 12 lbs.

$310.19

Add to cart

BXD2527G 2.5GPM 2700PSI 3/4″GAS SHAFT

FEATURES: Commercial Pump 1/2″ inlet 3/8″ MPT outlet Built-in uniflow unloader and chemical injector Built-in easy start Stainless steel plungers Steel shaft with built-in key One oil cap for travel and operation Stainless steel check valves Forged brass manifold Patent registered ball bearing design SPECIFICATIONS: Maximum flow: 2.4 Maximum pressure: 2700 PSI Maximum speed: 3400 RPM Shaft: 3/4″ hollow gas flange Weight: 11 lbs.

$211.19

Add to cart

RCV2.5G27D 2.5GPM 27OOPSI 3400RPM 3/4″ SHAFT GAS FLANGE

FEATURES: Triplex Plunger Pump MANIFOLD: High strength forged brass for long term use BOLTS: Eight 6mm PLUNGERS: NEW ceramic plungers, thicker wall to help prevent thermal shock VALVES: Stainless steel, valve seat o-ring is side mounted SEALS: high quality high pressure seals. NEW low pressure seal with built-in scraper PISTON GUIDES: Two piece piston guides DRIVE END: NEW connecting rod with 12% more load surface. Large side cover sight glass, oversized bearing. Rear cover oil drain CRANKSHAFT: Forged, precision ground SPECIFICATIONS: 3/4″ gas flange hollow shaft Maximum flow: 2.5 GPM 9.5 LPM Maximum Pressure: 2700 PSI 186 BAR Minimum Horsepower: 6.0 Gas Maximum temperature: 140F Plunger: 15mm Oil Capacity: 9.81 oz Inlet thread: 1/2″ FPT Discharge thread: 3/8″ FPT Weight: 10 lbs.

$410.99

Add to cart

GKC 38/17-GR 10GPM 2500PSI SUPER DUTY GEARDRIVE HOLLOW SHAFT (ASK 1″ OR 1-1/8″)

FEATURES: Oversized bronze connecting rod assemblies with guide pins for perfect cap alignment 2 lbs. each Heavy duty reinforced heads with external and internal bracing Large diameter niploy plated valve caps with increased thread depth Reinforcing ring on inlet and discharge ports Deeper back cover for increased oil capacity, 40 oz crankcase capacity SEPCIFICATIONS: Gear reduced: 2.2:1 Maximum Flow: 10.0 GPM Maximum discharge pressure: 2500 PSI Power requirements: 23HP Gas Shaft size: 1″ or 1-1/8″ (please specify) Seal Kit: UD-10 Valve Kit: UD-31

$1,892.87

Add to cart

8702.25 TALL 2 1/2″ RAIL KIT

$57.59

Add to cart

T1011 4.5GPM 2000PSI @1125RPM SOLID SHAFT 5.6GPM 1500PSI @1450RPM

SPECIFICATIONS Triplex Plunger Pump Maximum Volume: 4.5/5.6gpm Maximum Discharge Pressure: 2000/1500 PSI Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1125/1450 RPM Minimum Horsepower Requirements: 6.2 bhp (9.3 hp for gas engines) Bore: .787″ (20mm) Stroke: .630″ (16mm) Crankcase Capacity: 33.8 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Inlet Port Thread: 1/2″ FPT Discharge Port Thread: 3/8″ FPT Shaft Diameter: .945″ (24mm) Dimensions: 11.4″ x 9.2″ x 6.9″ Weight: 30 lb.

$823.20

Add to cart