MV410 2.1 FIXED INJECTOR 3/8FPT X 3/8MPT
$15.59
Product Description
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. The injection rate for this injector is set at the factory and not adjustable. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.
NOTE: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less.
SPECIFICATIONS:
- Fixed draw
- 15% draw at 1000 PSI or less
- 8 GPM maximum
- 3600 PSI maximum
- 160 F maximum
- 3/8″ FPT inlet
- 3/8″ MPT outlet
Additional information
| Weight | 1 lbs |
|---|
Related Products
GP FIXED INJECTOR 2.1mm HI-DRAW (100775)
FEATURES: Up to 20% injection draw rate. Can be affected by factors such as pressure, flow rate, length of discharge hose and chemical viscosity. Made in USA A cost effective solution to your chemical application needs. SPECIFICATIONS: Operating pressure: 4500 PSI maximum Flow range: 3-5 GPM 190F. maximum temperature 3/8″ MPT inlet and discharge 1/4″ hose barb chemical port$18.59
HI-DRAW 2.1 FIXED INJECTOR 3/8MPT X 3/8MPT
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. The injection rate for this injector is set at the factory and not adjustable. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode. NOTE: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less SPECIFICATIONS: Maximum pressure: 3600 PSI Maximum temperature: 300F. 2.7 to 4.9 GPM flow rate$20.99
MV400 1.8 FIXED INJECTOR 3/8MPT x 3/8MPT
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. The injection rate for this injector is set at the factory and not adjustable. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode. NOTE: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less. SPECIFICATIONS: 15% draw at 1000 PSI or less 8 GPM maximum 3600 PSI maximum 160 F maximum 3/8″ MPT inlet 3/8″ MPT outlet$15.59
MVR410 2.3 ADJ INJECTOR 3/8FPT X 3/8MPT
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode. NOTE: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less. SPECIFICATIONS: 15% draw at 1000 PSI or less 8 GPM maximum 3600 PSI maximum 160 F maximum 3/8″ FPT inlet 3/8″ MPT outlet$22.19
MVR400 1.8 ADJ INJECTOR 3/8MPT X 3/8MPT
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode. NOTE: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less. SPECIFICATIONS: 15% draw at 1000 PSI or less 8 GPM maximum 3600 PSI maximum 160 F maximum 3/8″ MPT inlet 3/8″ MPT outlet$22.19
ST-62 ADJ. CHEMICAL INJECTOR, 2-8GPM
SPECIFICATIONS: Flow rate: Adjustable 2 to 8 GPM Maximum pressure: 3600 PSI Forged brass housing Viton o-rings Stainless Steel spring and ball Inlet 3/8″ FPT Outlet: 3/8″ FPT 1/4″ Hose barb Repair Kit: Barens order #3470.MOUNTING AND OPERATING INSTRUCTIONS: (1). Connect the discharge port of the cleaner to the inlet port of the injector. (the arrow on the injector housing should point in the direction of the water flow) (2). Connect dwonstream components, such as discharge hose and gun, to outlet port (3). Connect the detergent hose to the hose barb and secure (4). Place the other end of the hose into the detergent (5). Turn on the water. On the ST-62 also turn adjustment to maximum counter clock-wise (6). To activate injector, employ the large orifice nozzle. The ST-62 will now need to be adjusted clockwise for detergent suction.$67.06
Reviews
There are no reviews yet.